Hooking Up Your Gas Barbeque To Your New Gas Line
First, turn off the gas valve at the coupling to ensure no gas leaks while youre hooking up your new grill. If gas gets into the air, it could combust.
Then simply connect one end of your quick-connect hose to your grill. If you didnt opt for one of these hoses, you could purchase and install one yourself now. Just make sure you use an adjustable wrench to get the new hose airtight.
Finally, test the hose and lines outside for any gas leaks. You can spray soapy water to the ends or anywhere on the hose you suspect a leak. Then turn on the gas. If you see bubbles appear at a joint or somewhere along the hose, you have leaks. If thats the case, turn off the gas and replace the hose. You should also ensure both ends are screwed on tight. Do not use your grill until all leaks are fixed!
What do you do if you suspect a gas leak?
Did you know that natural gas is actually odourless? Utility companies add the odour for the purpose of helping people detect gas leaks. Other signs you might have a gas leak include:
Hissing, whistling, or roaring sound. Obviously damaged connections to a gas appliance. Plants and grass that is dead or dying for no apparent reason, around your meter or gas appliance.
While youre waiting for someone to respond to the call, dont use phones or electronics near the leak. Do not turn appliances or lights on or off. Do not smoke or use a lighter, start a vehicle, or do anything that might ignite the gas. If the gas is already burning, call 911.
S Of A Natural Gas Line To Grill
A natural gas line is what connects your grill to the gas source. Its made up of three major parts:
A gas regulator that reduces gas pressure and controls the flow rate
A distribution pipe that carries the reduced fuel to where its needed
A hose that delivers the reduced fuel to a larger hose, which then connects to the grill
The hose and distribution pipework together. Youll need a longer distribution pipe if you have a large grill with many burners. If you have a small grill with fewer burners, you can use a shorter distribution pipe. In either case, youll always need a longer hose because it distributes gas from the larger tube or copper piping system for household appliances.
Connect Flexible Gas Line To Grill
I went to my local propane supplier and had them make me a 12 foot long rubber gas line. They supplied me with the fittings I needed to attach the gas line to the grill and the shut-off valve below the deck. Im not experienced with gas lines so I decided to have them make the gas line. As you can see in the next photo Ive attached the new gas line to the same location that the old one was connected to on the grill.
You May Like: Grilled Chicken Breast Temperature Gas Grill
You May Like: Which Model Weber Grill Do I Have
Do Natural Gas And Propane Smell The Same
No, natural gas and propane smell different. Propane has a much heavier, more pungent smell than natural gas. When you smell propane, it is immediately obvious. Natural gas, on the other hand, is nearly odorless. In order to give it a detectable odor, a chemical called mercaptan is added to it. Mercaptan smells like rotten eggs, so natural gas smells like rotten eggs. If you smell propane or natural gas, you should leave the area immediately and call the gas company.
Costs Incurred During Gas Line Installation
If you want to install a gas line from the main gas line and throughout your house, you will spend between $1300-$1500.
These costs are dependent on the number of appliances you are using and the distance from the gas supply. The higher the number of appliances and the greater the distance, the higher the costs youll incur.
Don’t Miss: How To Grill Cod Fillets
Is A Natural Gas Grill The Same As Propane
Natural gas grills and propane grills are similar in many ways. Both types of grills use gas to heat the food, and both types of grills have burners that can be controlled to adjust the heat. However, there are some key differences between natural gas grills and propane grills.
Natural gas grills are permanently connected to a natural gas line, while propane grills use a portable propane tank that must be regularly refilled. Natural gas grills are typically less expensive to operate than propane grills, since natural gas is generally less expensive than propane. Natural gas grills also tend to have more BTUs than propane grills, meaning they can reach higher temperatures more quickly.
One downside of natural gas grills is that they require a permanent connection to a natural gas line, which means they must be used in a specific location. Propane grills, on the other hand, can be used anywhere since they use a portable propane tank. Another potential downside of natural gas grills is that they can produce more carbon monoxide than propane grills. However, this is typically not a problem as long as the grill is used outdoors in a well-ventilated area.
If Unsure Please Speak To An Expert
If youre not confident of the laws surrounding the fitting of an NG grill or arent confident of following the process yourself, please stop here and consult a professional.
Its illegal to run flexible hosing for NG in some areas, so you will need to fit a fixed permanent supply. You must check on this before beginning.
And of course, if you improperly fit the natural gas supply, it could leak and be a fire hazard, so you need at least some competence with hand tools.
With that out the way, lets get to the meat of the article.
But before we detail our step-by-step guide to help you complete your mission, we feel you should familiarize yourself with the process via video. Here are two of the most popular grill brands being converted on film.
Donât Miss: Grilling Thin Chicken Breast On Gas Grill
Recommended Reading: Are Weber Grills At Lowes Different
Check Your Gas Grill Type
If your grill uses propane, youll need to purchase a natural gas conversion kit from the manufacturer. These systems can cost less than $100, and you can learn to install the equipment yourself. If a conversion kit is not available for your gas grill model, you should never create a DIY gas conversion kit. Instead, you need to purchase a natural gas grill from a retailer.
Using An Automatic Starter
Read Also: What Are Wood Pellet Grills
How Much Does It Cost To Run Gas Line For Bbq
The first is the cost of the gas itself. The second is the cost of running the gas line from the nearest source. And the third is the cost of installation.
The cost of the gas itself will vary depending on the type of gas you use. Propane is typically the most expensive, followed by natural gas. However, natural gas is often the most convenient option, as it is already piped into many homes.
The cost of running the gas line from the nearest source will also vary depending on the distance. If the gas line has to be run more than 50 feet, it will likely cost more than $1,000.
The cost of installation will vary depending on the type of BBQ you have. If you have a simple gas grill, the installation should not cost more than a few hundred dollars. However, if you have a built-in BBQ, the installation could cost several thousand dollars.
Did You Match The Gas Type In Your Home With That Of Your Grill
First and foremost, you’re going to want to determine what you will be using as a fuel source. There are two types of gas that you can use to fuel your gas grill: liquid propane or natural gas.
Natural gas is delivered to your home via a pipeline operated by your local gas company. LP is typically stored in 20-lb. portable propane cylinder tanks that you refill at a local hardware store or gas station. In rare instances, you might have a large tank on your property that stores LP gas in bulk.
Natural gas is extracted from the underground. It contains methane, as well as a mixture of propane, butane, and ethane.Liquid Propane is a by-product of both natural gas and crude oil. LP gas is more efficient than natural gas.
When you’re purchasing a gas grill, make sure to choose a type of model that corresponds with the specific type of gas you are using. The consistency and chemical makeup of these gas types are vastly different. Therefore, your gas grill will come optimally tuned for the specific gas type.
If you’re using natural gas, you should prioritize:
Alternatively, if you’re opting for a grill that uses a liquid propane cyclinder, here are some key points to consider:
Unfortunately, it may not be possible to convert your gas grill from LP to natural gas.
Also Check: What Is The Best Small Grill
Connecting The Gas Line
Now that you have your grill, its time to connect the gas line. Here are the six steps to follow:
1) Turn off the gas supply at your home. The valve should be close to your kitchen stove, near the gas pipe.
2) Connect the hose from the connector kit to your regulator.
3) The hose is placed inside a metal fitting attached to the regulator. It will help create a seal and ensure that any leaking gas doesnt escape your home.
4) Attach one end of the hose to the connector on the propane tank. Make sure this hose is not kinked or pinched at any point during this process.
5) Open up both ends of the regulator by turning each screw clockwise until they are tight enough for you not to move them by hand anymore.
6) Put on safety glasses and gloves before touching anything else! If you can smell gas, evacuate immediately and call 911!
Gas Pool Heaters And Gas Generators
Adding a pool to a home is a pretty big investment, but is popular in Frisco, Plano and nearby communities. It makes sense to get the most out of this investment by adding a pool heater at the same time for year round use. Having a pool heater will significantly extend the comfortable swimming season. Furthermore, natural gas has a significant advantage over electric heat pumps in how quickly natural gas heaters are able to warm up the pool.
Gas backup generators are experiencing a recent surge in popularity in this area due to the headlines about the reliability of the Texas power grid over the last couple of years. Many homeowners want the peace of mind that comes with an alternate power supply to protect them and their house from freezing.
Were grouping backup generators and pool heaters together in this section because the process of installing new gas lines for them is often very similar.
How much gas supply do they need? Pool heaters and backup generators need a higher flow rate of gas when they turn on. Unlike smaller appliances like cooktops and grills, the BTU load for these appliances are typically well up into the hundreds of thousands range starting at 150,000 to 300,000. This means that in many residential situations the only practical place to tie them into the system is all the way back at where the gas meter is located.
Recommended Reading: How Long Do You Grill Boneless Skinless Chicken Thighs
Maintaining Your Grill To Connect Gas Line To Grill
One of the best things about gas grills is how easy it is to maintain them. With a little bit of regular maintenance, you can ensure your grill lasts for years to come.
Gas grills are also easy to clean, which means you wont have to worry about scrubbing stubborn food residue off your grill. What seems like a daunting task becomes easier with natural gas because the heat from the grill will burn all that grease off.
The one thing you dont want to do is operate your grill without cleaning it first. Grease build-up on the heat deflectors can cause major flare-ups and potentially start an outdoor fire if improperly maintained.
Turn Off Your Gas At The Main And At The Canister
Were changing two gas sources here, so before we do anything we need to turn off both before we proceed. Its important to take strict safety precautions, and halting all gas flow is the best way to do this.
Firstly, switch off your natural gas at the main. Next, disconnect your propane bottle or canister, and store it away. As an added measure, open a valve to allow any residual gas from the manifold to escape, before then setting every valve to off. This should ensure that all gas has left the grill.
You May Like: How Long To Roast Corn On Grill
How To Extend Your Gas Hose
Have you been looking to add or extend your barbecue hose by 5 or even 10 feet, but you’re not quite sure how?
Maybe you’re looking to shift your barbecue across your deck, or just want to add a few extra feet so you can move it closer come winter time?
Regardless of the reasoning, we’re here to help you successfully and, most importantly, safely, install a hose extension to your barbecue.
Please Note: We do not recommend having a hose above 20 feet in length as it might cause a decrease in pressure. Causing your unit to under fire
Now before we get started, you should shut off your gas at the source before beginning this process.
Firstly, before you look to add an extension hose onto your barbecue, you must first take off the original hose.
Why, do you ask? This is because the hose on your barbecue is what needs to plug into your gas line, so the extension is placed between the unit and the original hose. This is done using appropriately sized wrenches, or adjustable wrenches.
Secondly, we need to prepare the extension hose so that it properly adapts to the existing unit and hose.
This is done by applying pipe sealant to the male end of the hose and attaching a flared brass connector fitting. The size of this fitting will depend on if your hose is 3/8″ or 1/2″ in diameter.
Side Note: Do NOT use Plumbers tape / Teflon tape in place of pipe sealant. This tape degrades over time which can lead to gas vapors escaping from the fitting
How To Properly Connect A One
One-pound propane cylinders like the popular DOT-39 are relatively easy to connect. They are most often found with portable grills that you need to burn for two or three hours. Though there are a few tabletop grills that deserve to pull double duty on a deck that will also run off a one-pound propane cylinder.
Its worth noting that one-pound gas cylinders use a different type of coupler than a larger propane tank. There are even some portable gas grills that have special connections that let you attach either type of cylinder or tank.
When connecting a one-pound propane cylinder to a pre-installed gas hose, you simply need to screw it in place. If you need to install a one-pound cylinder to an adaptor or control arm, it helps to screw the tank onto the adaptor first to make sure you have a firm seal. Then you can insert or screw the gas line adaptor into the grill.
You May Like: How To Cook Lobster Tails On The Grill
How To Connect Propane Gas Grill To Gas Line
If you want to connect your propane gas grill to your house, then that can be completely done. The process of doing it is easy, but you always need to be careful when doing something like this. No one wants any accidents to happen. Connecting your propane gas grill to your gas line is excellent. You can use all the gas you wish to without worrying about it getting over or changing the tank. The non-stop cooking is a good advantage of the gas line. Here is how you get this done.
