How To Clean Bottom Of Gas Grill

Get Rid Of All The Gunk At The Bottom

How To Clean Your Gas Grill | Weber Grills

After wiping the burners, youll want to move on to the plates underneath. My grill has two of these, and as you can see, they were pretty filthy. These pull right out, and are easy to clean off with your grill brush. I found that the sponge didnt do a whole lot on these plates, as this is where most of your grime ends up and you get a nice layer of char. Much like a cast iron skillet. Mostly just worry about the big chunks with these plates.

After the plates are out, youre left with basically just the removable bottom tray. Scrape any chunks from the edges onto your tray.

This is what my tray looks like . Slides right out.

Before and after of cleaning the tray. Some of the gunk will be loose, but some will probably need to be scraped off. I also used the sponge here to get at least some of that grease and grime off. Its not perfect, but are grills really supposed to be spotless?

Removing Rust On Cast Iron Cooking Grids

Prevent rust on your cast iron cooking grids by properly maintaining them and ensuring that they are well seasoned on a regular basis.

  • Inspect your grates for rust. If you have rust on your grates, this is the perfect time to remove it.

  • Minor rusting can be removed by gently scrubbing so make sure to try this first.

  • Stubborn spots of stuck on sauce and food can be removed by brushing those heavily built-up areas with oil and allowing them to soak for a while before scrubbing again.

  • Once cast iron cooking grids are clean and thoroughly dry, using a high-temperature oil like shortening, flaxseed oil, or canola oil, cover the grids completely, on both sides, with a thin coating.

  • Turn the grill on and heat the grill to between 350 and 400°F for 30 to 60 minutes. Remember to keep the temperature below the smoke point of the fat used, which will allow the oil to bond to the surface of your grids.

  • If your cast iron cooking grates are particularly dirty, you can wash them with soap and warm water, however, they will need to be completely dried and reseasoned immediately.

    And there you go! You have freshly cleaned cooking grids that are ready to make more delicious meals and memories.

    Do you have your own tips or hacks when it comes to cleaning your grill grates? Wed love to hear from you. Share your best cleaning tips for your barbecue grates on our social pages like Facebook and Instagram, using the hashtag #NapoleonGrills.

    S To Clean A Gas Grill With Minimal Effort

    Everyones least favorite part after a Sunday afternoon BBQ is cleaning the grill. Well, here at Carnivore Style we also hate this chore, so we decided to put our heads together to bring you a guide on how to clean your gas grill with minimal effort. You can get back to enjoying a beer with the rest of the party much quicker than you thought.

    Also Check: What Temperature To Cook Pork On Grill

    How To Deep Clean A Gas Grill

    Regular grill maintenance will help keep your grill working smoothly, but even if you’re diligent about brushing down the grates, your gas grill will need some TLC after a few months of use. Note that since you will be disassembling some parts of the grill for cleaning, you will need to know how to put it back together again, so take photos for reference if needed.

    1. Remove the propane tank. Ensure that the gas is in the off position and remove the gas tank from the grill.

    2. Brush the grill grates. Remove the grates from the grill and use a grill brush to clean both sides thoroughly. For a deeper clean, wipe with warm, soapy water.

    3. Clean the lid. Use a grill brush or plastic scraper to clean off any black flakes or debris from the underside of the lid. For a good scrub, dip the brush in warm, soapy water before each use.

    4. Clean the burner covers and tubes. Gas grills tend to have heat tents that sit on top of the burner tubes to help cut down on flare-ups. Remove and clean them using the grill brush or a plastic scraper. Use a grill brush to carefully wipe the burner tubes, brushing in the direction of the portholes to avoid clogging them.

    5. Scrape the interior. Use a plastic scraper and the grill brush to clean any build-up on the sides and bottom of the inside of the grill, using soapy water as needed. Once the inside of the grill is clean, push all of the debris into the grease tray.

    8. Reassemble. Carefully put the grill back together and reattach the gas tank.

    A Clean Grill Is A Well

    How to Clean Your Gas Grill: easy tips to get ready for summer

    A clean grill is a well-functioning, well-performing grill, says cookbook author and grilling expert Diane Morgan.Follow the manufacturers instructions for cleaning the grill annually or semiannually depending on how much you grill.

    You dont want any unsafe buildup of grease in your grill, and you want to make sure that the gas can flow easily through the ports. You do not want any scary flareups or strange smells coming from their grill!

    If you dont have the original cleaning instructions that came with your grill, just follow our steps here!

    Gather your cleaning supplies

    Recommended Reading: Frozen Turkey Burgers On George Foreman Grill

    Clean The Cooking Grates

    • Use the putty knife and wire brush to remove all debris from the cooking grates, brushing it straight into the garbage can the grates are balanced on. Scrape the biggest pieces of gunk first, then use a wire brush on the top and bottom of the grates to get what’s left.
    • Once all debris is removed, spray the grates thoroughly with grill cleaner, then wipe them clean with a heavy-duty disposable shop towel.

    Inspect And Clean Igniters

    • Inspect and test the igniters at the ends of each burner tube one at a time to make sure they’re clean and in good working order. Now is a good time to
  • Carefully remove any debris and grease from the igniters with grill cleaner spray and a shop towel.
  • Don’t Miss: Coleman Roadtrip Grill Water Pan

    How To Deep Clean Your Grill

    When you want to deep clean your grill or smoker, before starting, make sure the grates are cleaned and removed and the cooker is completely cooled. If it is a gas grill, also make sure the burners are off and the gas is disconnected.

    The best way to deep clean your grill is to work from the top to the bottom. Focus on every part of the grill and just utilize a clean, heavy-duty stainless steel wire brush. This will scrub off the carbon buildup throughout the grill. Remove components individually that can be removed and scrub them with the brush outside of the cooker. This will help ensure each part is thoroughly cleaned.

    Water, a mild dish detergent , and a clean sponge will help safely clean off any remaining residue and carbon from any components. Just make sure to thoroughly rinse and dry them before cooking again.

    Remember, harsh chemical cleaners, caustic oven cleaners, chloride, or bleach should never be used to clean your grill. Mild enzymatic cleaners, like Dawn, or even baking soda are much safer bets.

    Use the wire brush to scrub the exterior of any remaining fixed components as well as the sidewalls and firebox walls . These must be cleaned and maintained also or else the carbon buildup can quickly corrode the metal.

    As you work your way towards the bottom of the grill, your drip pan would be the last component to clean. Make sure it is fully emptied and cleaned out with mild soap and water.

    Scrub The Bottom Of The Grill

    How to Clean a Gas Grill | The Home Depot

    After removing and cleaning all removable parts, it should be easier to reach the bottom of the grill.

    And just to repeat myself, you have already done the inside lid and sides, yes? Good.

    Now remove any large quantities of grease and build up from the bottom of the grill with a scraper before scrubbing it out with a scourer and warm soapy water.

    Don’t Miss: How Long Will Traeger Pellets Last

    How To Clean The Outside Of A Gas Grill

    Do you love to grill? Is it hard to imagine a world without grilling? If so, you might want to take a little time to give it a quick clean. Especially if youre grilling every day, youd be surprised at how greasy and dirty the outside of a gas grill can get.

    Heres our quick and easy strategy to keep the outside of your gas grill clean and fresh.

    If you want to deep clean your grill inside and out, check out the video below.

    When Should You Clean Your Gas Grill

    How often you clean your grill depends on how much you use it. In general, a once a month scrub-down of the grates, bars, and grease management system is a good idea, says Kolman.

    If you notice your grill isnt heating up as high as usualsay, it struggles to get over 500 Fthat may be a telltale sign its overdue for a cleaning.

    Too much grease and schmutz in the grill can hinder the effectiveness of the grill and the quality of the food youre cooking, says Kolman.

    Don’t Miss: How To Clean Grease Off Patio Pavers

    Brushes For Cleaning Porcelain Grill Grates

    You must treat porcelain grates with great care. Chipping the porcelain enamel causes the cast iron beneath to rust. Never use a wire brush or scraper tool and avoid steel wool.

    Companies often market brushes with stainless steel bristles as porcelain safe, but keep in mind the delicate nature of porcelain. The abrasive nature of these tools causes cracks in the enamel and lead to rusting.

    Ways to clean porcelain coated cast iron grill grates differ from those for other grill grates because even small chips can ruin the grate forever. A grill brush with nylon bristles is always the best tool to use for scrubbing porcelain grill grates.

    If you do not have one a brush with brass bristles will work. Brass brushes are softer than wire and are less likely to damage the porcelain.

    Different types of grill grate, such as stainless steel grates, have different care instructions, but these recipes work for most other types of grates.

    Also Check: Char Broil Grate Cleaner

    Avoid Germs And Grease Fire

    How To Clean a Gas Grill, Start to Finish

    The greasy layer could cause a grease fire when it comes into contact with the burning flames and this is one of the reasons why you should learn how to clean it properly.

    The layer of grease also harbors all sorts of germs that may make their way into your meals.

    A dirty grill is also quite unsightly and this could make it difficult for you to get out there and prepare the dishes that you love.

    With all these reasons, it is now evident why you should maintain your cooking device on a regular basis and this article will take you through the best procedure of doing that.

    Don’t Miss: Temperature To Grill Pork Steaks

    Vacuum The Dirt And Charcoal Inside Your Grill

    After removing the grates and metal pieces, you might see a lot of loose dirt, charcoal, and food sitting inside your grill. An easy way to remove all of this is to use your handheld vacuum cleaner. Use an extension cord if necessary. If you can use a vacuum, it will save you a lot of time.

    If you dont have a handheld vacuum cleaner, then wipe up the loose dirt and charred food with a couple of rags. The grill can be pretty grimy so dont use new towels that you want to keep in great condition.

    Simply Wash And Rinse With Soapy Water

    Its a good idea to start with fresh warm soapy water again. Otherwise, youll get grease smears all over the outside of your grill, and thats never a good look.

    Using a sponge, gently scrub the exterior all over, particularly around the grooves and knobs where grime tends to stick.

    If you have any stubborn bits of burnt food or grime, soak it with warm water and cleaning product a few times, 30 seconds or so apart to loosen it.

    Do not use a scourer as this will scratch the paintwork or surface.

    Once youve rubbed it down thoroughly, rinse it with clean water using your garden hose set to a low power setting, and thats it!

    You May Like: Get Grease Out Of Concrete

    Do I Need To Clean My Gas Grill After Each Use

    You do not need to clean your gas grill after each use. If you use your gas grill every day, clean it every one to two weeks. If you use it a couple of times a week, clean it every month. If you spend a whole day barbecuing for a large group, you may want to clean your gas grill after youre done grilling.

    How To Clean A Grill: A Step

    How to Clean Your Gas Grill


    Theres nothing quite like firing up the grill and cooking your meal out in the fresh air. To make sure your grill operates as it should, its important to keep it clean. Luckily, once you learn how to clean a grill, youll see that its pretty easy to do.

    Whether youve just purchased your first grill or youre a seasoned griller looking for a few quick cleaning tips, youre in the right place. Heres what you need to know.

    Recommended Reading: Pork Temp On Grill

    Best Ways To Clean Gas Grills

    Deep cleaning the entire grill should be part of every grill owners cleaning regimen.

    It should be completed every six months with moderate use, and it will make a huge difference if it is.

    There is some minor assembly required for this, so its always a good idea to have a user manual handy.

    Lastly, make sure the gas supply is turned off while cleaning. To ensure safety, detach the gas tank from the grill prior to cleaning.

    Ideally, you should allow the grill to dry completely before reassembling the pieces. This step can help to prevent rust from forming on the grill.

    Soak The Grill Grates

    Once everything is disassembled, the real work begins.

  • Use soap and water and give the grates a pre-scrub with the scrub brush.
  • Cover the grill grates in baking soda.
  • Put them in a large plastic bag.
  • Add enough vinegar to cover them to the bag.
  • After they are done fizzing, close and seal the bag.
  • Lay it on a flat surface overnight.
  • Recommended Reading: How To Grill Halibut Steaks

    How To Clean Grill Burners

    Now, remove the burner tubes and clean themthoroughly. They may be attached with a screw or cotter pin, depending on yourgrill. Removing burners can be quite complex with some grills. Old Weber Genesis grills had a complex system,where the electrodes were mounted to the first burner, and a crossover tubecarried the flame to the other two. Over time, corrosion would tend to freezethe screws attaching the crossover tube, preventing you from detaching it,which required an elaborate workaround to change the burner .The point of this digression is that burners are complicated, and vary a lotfrom model to model, and brand to brand. If you cant look at the burner andfigure out how it works before disassembling it or if parts are frozen inplace feel free to . Wed be happy to talk you through it.

    Remove the igniter and wrap the wire endscarefully in foil to keep them free of debris. Be sure to note exactly how theigniter fits into the burner failing to reinstall your igniter assemblycorrectly is one of the surest ways to have your grill refuse to light.

    To insure you get the correct burner from your grill, measure the burner from end to end and compare the dimensions to what we list on our site.

    Clean The Heat Deflectors

    Deep Cleaning Your Weber Gas Grill

    Many gas grills have thin steel plates, angled in the shape of a “V,” that separate the burners from the cooking chamber. These heat deflectors serve to distribute heat evenly around the cooking chamber and prevent the gas flames from burning the foods directly overhead. Grease and food residue often drips down onto these deflectors.

    Clean the deflectors after every three of four uses of the grill by removing them from the cooking chamber and scrubbing them with warm soapy water and a nylon brush or scrubbing pad. Dry them completely before putting them back in the grill.

    Also Check: Cleaning Char Broil Infrared Grill Grates

    Wipe Grime From The Burners

    These are the burners themselves. Some grills make them easier to remove than mine if they come out easily, you can rinse these with your soapy water as well.

    I didnt want to remove mine and risk messing things up, so I took my damp sponge and just wiped them down. I was surprised at how much grime came off. That grime can ultimately clog the burner if its not cleaned regularly.

    Clean Cast Iron Grill Grates Without Removing From The Grill

    Cast iron grill grates are durable and heat evenly but can be prone to rusting. If you open your grill to see rusty cast iron grates, dont despair. Reach for the baking soda, even if your cast iron grates dont easily come out of your grill.

    • Make a paste of 1 ½ cups ARM & HAMMER Baking Soda, ¼ cup dish soap, and ¼ cup white vinegar in a small bowl. It should be a frothy liquid consistency that sticks to the grill grates.
    • Using a brush, paint the grill grates with the paste, avoiding the heating elements if this is a gas grill. Close the grill. Note: do not turn the grill on.
    • Let the paste sit for 8-12 hours or overnight.
    • Use a nylon-bristled brush or scourer sponge to remove the loosened debris and grime.
    • Use a damp sponge and warm water to wipe away any remaining residue.

    Once all the rust is removed, thoroughly dry the grates and rub them with a generous amount of vegetable oil to coat them and protect from moisture. You can also turn the grill on high after coating with oil to help lock in the seasoning and be ready for your next BBQ.

    Don’t Miss: Are Grill Mates Gluten Free

    Popular Articles

    More Recipes Like This