Gas Type Propane Or Natural Gas
The cost is roughly the same for installing a propane gas line from the tank to the house as the cost to have natural gas run to the house. Find out which kind of gas your home currently has.
- Propane gas is stored in tanks, usually outside the home.
- Natural gas lines are comparable to power bills in that a local or city utility company provides the service. Instead of a tank, there will be a meter outside your home.
If you are building a new home or do not currently have gas, there are several benefits to each type. Take the time to understand the differences between propane and natural gas so that you can choose the right one for your individual needs.
Mistake #: Going Over Budget
When planning for your gas grill, stick to your budget. Compared to a charcoal grill, a gas line adds additional expenses for installation, parts, and equipment. This is in addition to the cost of the actual grill. Once you start using your gas line grill, you may notice a slight increase in your gas bill if you use it frequently. However, you wont need to buy charcoal or propane. Making a note of all of these expenses can help you stay within your budget.
How Much Should It Cost To Bury My Pe Pipe
These prices vary from in different areas of the country so I tried to list them on the high side of what I think they should be.
Permit cost should be less than $100.00
Currently a daily rental for a 24â³ trenching machine is less than $200.00 and closer to $125.00 for four hour rental.
On Amazon you can get 100 feet of 1â³ PE pipe for just over $200.00 and I chose 1â³ because itâs an average size.
Add in two risers at about $85.00 each for two would be $170.00
Their are always some miscellaneous items like a pressure gauge for about less than $10.00 and the fittings to connect. You may find a reverse threaded coupling handy.
Some inspectors may not want to see a union in this application. A reverse threaded coupling would make the job look more professional and impress your inspector.
Reverse couplings can be a little intimidating at first, but with a little trial and error youâll get the idea.
Itâs nothing more than a short length of pipe or nipple with right handed threads on one end and left handed threads on the other. A special coupling fits on the left handed thread end and it will connect two pipes together just like a union.
The arrows point to the unpainted reverse coupling nipple on top connected to riser at the bottom arrow.
So back to how much does it cost to run a gas line underground:
- Permit $100
- Misc $50
- Total $690
Read Also: Bubba Burger Grill Temperature
Enjoy Outdoor Grilling Convenience
You can now fire up your grill at the touch of a button. Theres no need to worry about running out of gas in the middle of a cookout, and you dont have to lug heavy tanks around your backyard. Simply relax and enjoy the natural gas grilling experience.
An alternative to using an outdoor gas grill is making an outdoor brick and mortar grill that will suit your backyard. Read our brick grill designs for more information.
Why Would I Need Gas Line Installation
One of the most common reasons for gas line installation is a homeowner wants to replace electric or oil appliances for ones powered by gas. In general, gas appliances tend to be more energy efficient and less expensive in the long run.
You may need a new residential gas line if you want the following added to your property:
- Gas furnace installation
- Outdoor grill
- Can I install a gas line by myself?
Gas line installation is not for amateurs. If you dont have extensive experience with gas line installation and repair, we highly recommend you contact a licensed heating and cooling contractor in your area. Natural gas leaks caused by mistakes during installation are a serious health hazard and a threat to your home.
While we understand wanting to save money where you can, mistakes during gas line installation could have deadly consequences. To avoid explosions, personal injury, and destruction to your home, we recommend you hire professional gas line installation contractors.
Recommended Reading: What Temperature To Grill Boneless Chicken Breast
Cost To Run Natural Gas Line From Street To House
Installing a natural gas line from the street to your house costs between $0 and $2,000, with most homeowners spending $980 for an average of 49 linear feet of connected pipe. The average cost is $12 to $25 per linear foot, while some gas companies offer free installation depending on the distance.
The houses location, obstructions, the distance from your home to the main line, and local building codes can significantly increase costs, though they typically don’t exceed $2,000. In many cases, the gas company installs, owns, and maintains the gas line and gas meter up to your home.
Ask your gas company about these potential fees:
- New account fee
- Final inspection
Why Are Natural Gas Grills So Expensive
Natural gas grills are more expensive than other options but they are with the money. They are very convenient and easy to work with.
The reason why natural gas grills are more expensive is that they come with long and fast connection fittings. These features cost more to make thus resulting in their higher price range.
Don’t Miss: How To Clean Your Traeger Grill
Gas Pipe Installation Material Costs
The average cost of materials for installing or repairing gas lines is $1 to $10 per linear foot, or $4 per foot on average which includes piping, connectors, fittings, and mounting hardware. Pricing depends on the type, diameter, number of turns, and location .
Different types of pipe include flexible corrugated stainless steel tubing , polyvinyl chloride , high-density polyethylene , galvanized steel, black iron, and copper.
Types of Gas Pipes and Cost
|Uses: Underground exterior lines. Wont develop pinhole leaks, wont corrode.Drawbacks: Can crack or break during installation.|
*Copper and brass pipe has strict code requirements because it has an expected life of 20 years.
What You Need To Connect Natural Gas Line To Grill
Connecting your natural gas line to the grill is not a single-tool project. It requires a few different pieces of equipment. Heres a quick list of what you will need:
- Gas shutoff valves
- Pressure gauge
- Standard wrench
If you have all those things already, we suggest doing it by yourself. Otherwise, its easier to just call a professional to install the gas line instead of DIY-ing it.
You may also like: How to tell if propane grill regulator is bad
Construct The Pipe Run
To take the gas supply from your established property pipework to your outdoor grill, you need a pipe run. The service professional drills a hole in your wall and begins to connect different pipe sections. At each connection, Teflon tape or pipe dope secures the fittings for safety.
The service professional must use several straight pipe pieces in conjunction with elbow parts. This design means your pipe run can reach your outdoor grill using the least amount of materials. When the pipe run is complete, it ends at a location called a stub-out. The service professional will surround the stub-out with insulating material to reduce the risk of air leaks.
What Are You Waiting For
Our expert team will provide you an estimate for installing your new gas line and grill and can get started on the work immediately. Once the gas line location has been determined a trench will be dug to code and buried with care. The proper connections will be installed, and your gas grill will be connected, tested, and lit. Let Auger Pros Plumbing be your inspiration for installation! We can also assist with installing a gas line to your fireplace, gas dryer, swimming pool, spa heater, or gas fire pit. Essentially, with natural gas, youll never run out of fuel, as long as the gas company keeps the natural gas supplying flowing to your home!
If youre hoping to make the most of your outdoor kitchen, We highly recommend investing in outdoor gas lines. Give us a call today at 214-206-6580 to learn how we can help.
Don’t Miss: Weber Stainless Vs Cast Iron Grates
The Benefits Of A Natural Gas Barbeque Hook Up
Having a natural gas line for your barbeque is very convenient. Instead of worrying about your propane running out in the middle of cooking dinner, youll have a non-stop supply from your utilitys natural gas line. Once installed, your hook up will be located near where your grill is. When you want to use the barbeque, simply turn on the valve, light the grill and away you go.
The natural gas you use for your barbeque will be cheaper than how much youll pay for propane. Youll experience substantial savings over the years, not to mention the headache of having to fill or swap your tank.
Natural gas is lighter than air, and it rises. Propane is heavier and tends to build up when it is used. This factor makes natural gas a safer fuel to use compared to propane. You dont have to worry about built-up gas igniting unexpectantly. It also burns cleaner than propane, which means fewer toxins are released in the air and in your food.
Propane also gives off a wet heat, which can change the texture of the food you are cooking. Some people think this type of heat has a negative impact on the food and prefer how natural gas cooks instead.
This article will discuss the cost of having a professional gasfitter hook install a line out for your barbeque. Before getting to that, we will cover some important information.
Common Gas Line Sizing Questions For Underground Gas Piping For A Firepit
We get a lot of questions about the required diameter of pipe and gas sizing requirements for underground gas piping for a Firepit. It is not uncommon for a Firepit to have a maximum BTU load exceeding 300,000 BTU. This is a massive BTU load! In comparison, your average 40-50 gallon water heater only requires 40,000 BTU. We often get asked if a new underground gas piping line to a Firepit can be routed from an existing BBQ stub out. The answer 99.9% of the time is unfortunately NO. Due to the high BTU demands of most Firepits, we almost always need to begin the new underground gas piping line directly from the gas meter to ensure the Firepits high BTU requirements will be met. If your gas meter is in a location that prohibits underground gas piping, we can use a combination of exposed black Iron mounted to the side of your home to get past any obstacles such as sidewalks or driveways that might make direct burial underground gas piping from the gas meter not possible.
Inportant Note: Black Iron Pipe can never be buried underground! It doesnt matter if you paint it, wrap it in tape, or any other means of sealing the pipe, black Iron will fail if buried underground.
Some of the modern Firepit kits can be much lower BTU loads compared to a Firepit built from masonry and gas rings. Of all the gas appliances we install underground gas piping for, Firepits vary the most on BTU load between models/designs.
Also Check: Napoleon Prestige Pro 665 Vs Weber Summit 670
How Much Will Gas Line Installation Cost
According to HomeAdvisor.com, the average cost of gas pipe installation and repair is between $259 and $753. Costs can vary based on materials, labor, and difficulty of installation. For example, where the gas pipes are installed can determine how much technical experience is needed by the contractor to complete the job.
Who Should I Trust With Gas Line Installation
Before hiring a gas line installation contractor, we recommend doing your research. While we understand doing research on natural gas line installation companies probably isnt what you want to do during your weekend, it can save you a lot of grief.
Make sure you ask for references from prospective heating and cooling companies. A reputable gas line installation company will be able to provide recent references similar to your project. Also, make sure that the company you choose has the appropriate license for natural gas line installation in your state.
If you are interested in our new gas line installation service, please feel free to give us a call at . The Grand Rapids heating and cooling contractors at Haisma Heating and Cooling are proud to offer their expertise and high-quality customer service.
Recommended Reading: Pit Boss Pro Series 1600 Elite
What To Know Before You Go For It
If you decide to go with a natural gas grill connected to your home gas system, there are some things you should know before you make your grill purchase.
First, natural gas grills and propane grills are not the same thing, so be sure to shop for the right type.
Some areas require a permit. If you live in a community that has a homeowners association, certain types of grills may be subject to restrictions. So youll want to check on these things. Hopefully your locale only requires that you install a quick connect shut-off valve at the house.
Speaking of the installation, there are a couple of different methods of hooking up your grill to the gas line. The safest is with a gas plug safety quick disconnect. Your best bet is to hire a natural gas plumber to do this for you.
Youll Have To Choose Between Natural Gas And Propane
Before having a line set up, its important to think about whether you want natural gas or propane for your grill. Both are feasible options, and both fuel types work well for cooking. Most people consider what type of fuel is already available to them in their home and go with what is most convenient. However, if you dont have either fuel type at your home currently, its important to think about which you would rather go with.
You May Like: What Temp Do You Cook Shrimp On The Grill
Youll Have To Choose A Permanent Location For Your Grill
If youre planning to hire a plumber to install a grill line, you want to make sure you know where your grill is going to sit for a very long time. That means really thinking about the ideal location and then committing to it. You dont want to move it a year from now, because that means spending the same amount of time and money having a new line put in later.
Underground Gas Line Installation Cost Per Foot
The average cost for underground gas line installation is $12 per linear foot, with prices ranging from $10 to $25 per foot which includes trenching, shaping, backfill, labor, and materials. However, more complicated gas line installations can cost as high as $75 per foot.
Costs vary based on how much work is required. Preparing the site, digging, the trench, and filling the trench can be both time consuming and complicated. Underground gas line installation requires piping that meets specific requirements, and this generally costs more than non-underground projects.
Gas Line Installation Cost Per Foot
Inspections are required in most states to ensure piping is at the required depth. For example, California has strict regulations regarding underground gas line installation because of earthquakes and other natural disasters. Piping should be at least 18 inches below ground for safer areas and 24 inches for locations at higher risk of external damage.
Black Iron and Galvanized Steel Gas Pipe
Installing black iron gas pipe averages $4.89 per linear foot, while installing galvanized steel averages between $2.19 and $9.33 per linear foot. Both are more labor-intensive than PVC and HDPE piping.
PVC and HDPE Piping
PVC piping installation averages between $0.22 and $1.55 per linear foot, compared to the average installation cost of HDPE of $0.99 per linear foot. Both are considered a better alternative than metal pipes for low-pressure gas lines.
Don’t Miss: Grilling Pork Tenderloin Gas Grill
New Gas Meter Install Cost
The average cost for a new residential gas meter ranges between $200 and $300, while installation labor adds $100 to $300. Many time you won’t have to pay anything because gas companies own, maintain, and install the lines and meters up to your home.
Gas Meter Installation Cost
|Install Labor||$100 $300|
Installation and replacement costs are often comparable, though replacement typically will not require additional charges, such as application fees. New meters must meet regulations and code requirements for their placement, and gas providers may require a unique meter for their services, limiting your choices.
How To Connect Your Natural
- Written by Heaven Stubblefield on Mar 03, 2010To ensure our content is always up-to-date with current information, best practices, and professional advice, articles are routinely reviewed by industry experts with years of hands-on experience.Reviewed by
If you connect your natural-gas barbecue to your gas line at home, you will never have to worry about running out of gas in the middle of a family cookout. To connect your barbecue to your homes gas line, just follow these steps.
Warning: Natural gas barbecues and their fuel are highly combustible. Make sure you are familiar with your barbecues manual and dealing with natural-gas lines before proceeding. If you are not a licensed gas fitter, consult with a qualified professional to complete this job. In addition, look up the code restrictions for your area before completing this project, as there may be special instructions and laws.
Running the Tubes
From the main gas line, run the piping from a port in the mainline, ending at a quick-connect coupling that should be located at your preferred location in your backyard, in a wall.
You can also have several couplings installed in case you may want to move the grill around, or if you want to have two natural-gas barbecues running at the same time.
Connecting the Grill-
Step 1 Turning off the Gas Valve
Step 2 Installing Hose to the Coupling
Use the adjustable wrench as necessary to ensure the hose is installed tightly to avoid gas leaks.
Step 3 Detecting Leaks
You May Like: Grilling Chicken Thighs Time